This family of high resistance (10M Ohms to 1 Tera Ohms) resistors employs a thick film resistive element and is designed for long term stability and low TCR (temperature coefficient of resistance) which are compatible with high volume SMT applications. TCR’s as low as +/-25ppm and tolerances as tight as +/-1% are available.
Standard EIA size packages 0402, 0603, 0805, 1206, 2512 and 4020 can handle power up to 2 Watts. These are non-magnetic resistors and thus are well suited for nonmagnetic applications.
For resistors operating in high temperature environments, we have two temperature options up to +155C or +300C. Their platinum silver terminations are designed are compatible with soldering, epoxy bonding, or wire bonding applications. The wide range of electrical and mechanical characteristics allow for design flexibility.
We can design our high temperature resistors for specific voltage requirements by trimming these thick film resistors. Contact our applications engineers to discuss high voltage or high temp ( +300C) applications.
Resistor Thick Film, High Temperature Product Image

KEY FEATURES:

  • Resistances from 10M to 1T Ohms
  • Resistance Tolerances to ± 0.25%
  • Power Rating 0.05 to 2 Watts
  • Non-Magnetic
  • TCR's to ± 25ppm/ºC
  • Special High Temperature Version to 300ºC
  • High Value Thick Film Resistance Element
  • Available in sizes 0402, 0603, 0805, 1206, 1210, 2512, 4020
  • RoHS Compliant

APPLICATIONS:

  • Engine Sensors
  • Surge Protection
  • Data Recorders
  • Temperature Sensors

PRODUCT SUMMARY:
PRODUCT SERIES (RKS) SIZE POWER RATING (W) 1 WORKING VOLTAGE (VAC) TEMPERATURE RANGE 2
TRIMMED UNTRIMMED (> 5%)
RKS07 0402 0.050 30 60
  • - 55°C to + 155°C (Standard Version)
  • - 55°C to + 300°C (High Temperature Version TCR valid + 25°C to + 125°C )
RKS14 0603 0.1 75 150
RKS15 0805 0.125 100 200
RKS18 1206 0.25 200 400
RKS41 1210 0.35 300 600
RKS20 2512 1.00 1500 2000
RKS21 4020 2.00 4000 6000

1 Solder Pads must have sufficient heat conduction
2 See Power Derating Curve

  • TEMPERATURE COEFFICIENT: ± 25ppm/ºC to ± 3000ppm/ºC
  • TOLERANCE RANGE: ± 0.25% to ± 30%
Resistor Thick Film, High Temperature Power Derating Curve

Electrical Characteristics

Package Size Tolerances Available ( % )
Temperature Coefficients Available ( ± ppm/°C ) 2
Voltage Coefficients Available ( ppm / V ) 2
Resistance Ranges ( Ω )
10M - 100M >100M - 500M >500M - 1G >1G - 10G >10G - 100G >100G - 1T
0402 5 to 20%
50, 100
500ppm/V
5% to 20%
100, 250
1000ppm/V
5% to 20%
250, 500
1000ppm/V
10% to 30%
1000, 2000
2000ppm/V
10% to 30%
2000, 3000
5000ppm/V
Contact Factory
0603 1 to 20%
50, 100
500ppm/V
2% to 20%
100, 250
500ppm/V
5% to 20%
250, 500
1000ppm/V
5% to 30%
500, 1000
2000ppm/V
10% to 30%
2000, 3000
5000ppm/V
Contact Factory
0805 0.5 to 20%
50, 100
500ppm/V
2% to 20%
100, 250
500ppm/V
5% to 20%
250, 500
500ppm/V
5% to 20%
500, 1000
1000ppm/V
10% to 30%
1000, 2000
3000ppm/V
-
1206 0.5% to 20%
25, 50, 100
250ppm/V
2% to 20%
50, 100, 250
500ppm/V
5% to 20%
100, 250
500ppm/V
5% to 20%
500, 1000
500ppm/V
10% to 30%
1000, 2000
1000ppm/V
-
1210 0.5% to 20%
25, 50, 100
25ppm/V
2% to 20%
50, 100, 250
250ppm/V
5% to 20%
100, 250
250ppm/V
5% to 20%
250, 500
250ppm/V
5% to 20%
500, 1000
500ppm/V
10% to 30%
1000, 2000
2000ppm/V
2512 1 0.5% to 20%
25, 50, 100
25ppm/V
1% to 20%
25, 50, 100
50ppm/V
1% to 20%
100, 250
50ppm/V
2% to 20%
100, 250
100ppm/V
5% to 20%
250, 500
250ppm/V
10% to 30%
500, 1000
1000ppm/V
4020 1 0.25% to 10%
25, 50, 100
10ppm/V
0.5% to 20%
25, 50, 100
25ppm/V
1% to 20%
25, 50, 100
25ppm/V
2% to 20%
50, 100
50ppm/V
5% to 30%
100, 250
100ppm/V
10% to 30%
500, 1000
500ppm/V

1 TCR in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C
2 VCR: typical values, all negative, not for all TCR values available

Environmental

Specification Value
Solderability 250°C, 3s
Max Soldering Temperature 260°C, 10s
Climatic Category 55 / 155 / 56

 

Long Term Stability Max Triangle symbol for Long Term Stability for Thick film resistorR
<1 G Ω 1 G W - 10 G Ω >10 G Ω
Storage 125°C, 1000h <1% <2% <5%
Load Life 70°C, 1000h <0.5% <1% <2%
Maximum Voltage, 1000h <0.5% <1% <2%

Mechanical Characteristics

Resistor Thick Film, High Temperature Dimensions
Package Size
Dimensions
L (Length)
Inches [mm]
EB (End Band)
Inches [mm]
W (Width)
Inches [mm]
T (Thickness)
Inches [mm]
0402 0.037 ±0.002
[ 0.95 ±0.05 ]
0.004 +0.004 / -0.002
[ 0.1 +0.10 / -0.05 ]
0.018 ±0.002
[ 0.48 ±0.10 / -0.05 ]
0.012 ±0.002
[ 0.3 ±0.05 ]
0603 0.060 +0.006 / -0.002
[ 1.5 +0.15 / -0.05 ]
0.008 +0.008 / -0.004
[ 0.2 +0.2 / -0.1 ]
0.030 +0.008 / -0.002
[ 0.8 +0.15 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0805 0.080 +0.006 / -0.002
[ 2.0 +0.15 / -0.05 ]
0.012 +0.008 / -0.004
[ 0.3 +0.2 / -0.1 ]
0.050 +0.006 / -0.002
[ 1.25 +0.15 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
1206 0.126 +0.006 / -0.002
[ 3.2 +0.15 / -0.05 ]
0.012 +0.008 / -0.004
[ 0.3 +0.2 / -0.1 ]
0.060 +0.008 / -0.002
[ 1.5 +0.2 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
1210 0.126 +0.006 / -0.002
[ 3.2 +0.15 / -0.05 ]
0.032 ±0.008
[ 0.8 ±0.2 ]
0.098 +0.008 / -0.002
[ 2.5 +0.2 / -0.05 ]
0.020 +0.006 / -0.002
[ 0.5 +0.15 / -0.05 ]
2512 0.250 +0.006 / -0.002
[ 6.3 +0.15 / -0.05 ]
0.035 ±0.008
[ 0.9 ±0.2 ]
0.138 +0.008 / -0.002
[ 3.5 +0.2 / -0.05 ]
0.024 +0.006 / -0.002
[ 0.6 +0.15 / -0.05 ]
4020 0.400 +0.006 / -0.002
[ 10.2 +0.15 / -0.05 ]
0.035 ±0.008
[ 0.9 ±0.2 ]
0.200 +0.008 / -0.002
[ 5.1 +0.2 / -0.05 ]
0.024 +0.006 / -0.002
[ 0.6 +0.15 / -0.05 ]

Packaging Information

Bulk or Blistertape to IEC 60286-3
  • Tape width 8mm / Reel Diameter 180 or 330mm
  • Minimum quantity Bulk / 100 pieces per value (30 pieces per value for sizes 4020 and 2512)
  • Minimum quantity Tape & Reel / 500 pieces per value
    (Note: Except size 0402 / 1000 pieces per value)

* Moisture Sensitivity Level: MSL-1

Available Options (Consult Factory)

  • Special Testing Requirements

How to Order

High voltage Resistor Thick Film, High Temperature Part Number Breakdown